Gleam Finish Grout
Superb Gleam Finish Grout is a 100% solid epoxy grout used for ceramic tile, vitrified tiles, marble, and stone that is stain-free, color-fast, chemical-resistant, and aesthetically pleasing. It is perfect for places where materials are subjected to a lot of wear and tear, shock, and chemicals, such as homes and businesses.
Advantages:
- Stain free
- Massive strength
- Long Life i.e. great durability
- Sparkling / Dazzling / Glittering / Gleaming effect to give a stylish or fashionable catalyzed look to your tiles and stone joints
- Color Fast
- Easy to install and clean
- Chemical & Temperature resistant
- Non-cracking or powdering
- Water cleanable
Maintenance :
- Grout must be fully cured before regular cleaning.
- Grout products are produced to the highest quality standards. To maintain a clean tile surface, use a neutral-pH cleaner for maintaining the floor, followed by a clean water rinse.
- Do not use harsh chemicals to maintain the tile surface, Before proceeding with cleaning, consult the cleaners manufacturer for compatibility, use, and application instructions. Remove or rinse fatty acid residue from the grout surface to avoid potential grout deterioration caused by prolonged exposure.
Surface Preparation:
- The temperature of the substrate of tile work must be between 60F and 90F while grouting for best results.
- Maintain that temperature until Premium Epoxy has hardened sufficiently (in 24 to 72 hrs.)
- The application of grout release over certain types or porcelain or textured surface tiles or stone may be advantageous where a fine surface porosity might trap fine cement particles or color pigments. Seek the advice of the tile or stone manufacturer and site -test (mock up) on separate samples before grouting.
- Clean the tile or stone surface to remove dust, dirt, mortar, adhesive and other contaminates that may cause grout discoloration.
Where to Use :
- For grouting most ceramic, porcelain, and quarry tiles; acid-resistant floor brick, pavers, and natural-stone tile.
- For Grouting interior residential and commercial floor/ wall applications.
- For heavy traffic areas such as subway stations, shopping malls, and airport terminal buildings.
- For areas requiring stain-resistant grout such as countertops, vanities, and laboratory tabletops.
- Marble granite and slate are products of nature made from a vast combination of minerals and chemicals that may cause the material to behave or react in a manner beyond our control. Likewise, we do not have control over any of the materials and processes used in the manufacturing of agglomerates. Therefore, determine the suitability of all the materials before proceeding with the installation. To ensure desired results, a mockup installation is required before the actual installation.
Protection :
- As propane gas heaters will yellow the epoxy, refrain from using such heaters or properly vent all exhaust.
- Do not disturb, grout, or walk over tiles for at least 24 hrs after setting.
- Grout should be cured for at least 72 hrs before routine cleaning.
- Premium Grout should be cured for at least 10 to 14 days at 73F (23C) before water immersion or exposure to chemicals.
- Longer times will be needed for colder temperatures.